loading

Professional manufacturing and production of radiator cooling fans, condenser fans and fan motors, etc.

Tong chi tell you car radiator fan mini car radiator cooling fan what are the precautions for the installation and maintenance

Tong chi mini cooling fans tell you installing a mini car radiator fan cooling fan best between heat sink and cooling fan coating thermal conductive silicone. Because of the effect of thermal conductive silicone is not just the cooling fan produced quantity of heat quickly and evenly is passed to the heat sink, in many cases, silicone can also increase the heat sink is not flat surface under thermal contact with the cooling fan. Because silicon grease has certain viscosity, can have not let auto cooling fan of the heat sink and cooling fan separation effect.

but tong chi micro auto cooling fan small make up to tell you about silicone, tong chi cooling fan small make up of micro and subcompact cars can uphold the principle is the use of less less, on the surface of the cooling fan on drop a little finger after wipe evenly, otherwise easy to make the case not only internal dirty, may cause the leakage fault.

tong chi micro auto cooling fan actually small make up tell you fix a cooling fan with the tightness of the metal shrapnel, generally can be adjusted, if does not use the kernel bare the cooling fan, the cooling fan should be installed closely way as possible, otherwise may because of the heat sink can't fully contact with the surface of the cooling fan and cooling efficiency and to reduce the vibration. Found in use, if the newly installed a cooling fan reduced efficiency in the use of just a few days, usually is the result of the shrapnel slight slippage, such as gear piece slides up a block, etc. When the shrapnel in place so can't for fear of the laborious and careless, must do all it can to ensure that tighten. Don't too hard and also when installation, pay attention to so as not to damage the cooling fan outlet near the components and circuits.

tong chi mini cooling fans tell you small make up the cooling fan motor cooling fan at present, the side effects of inhalation of dust and more dust not only hinder the heat sink is ventilated, may also affect the rotation of the fan, so a cooling fan in use after a period of time the need for cleaning.

tong chi micro auto cooling fan small make up tell you need to take the heat sink and fan apart when cleaning, the heat sink can wash with water directly, for the fans and cooling with viscous oily dirt, can use cotton swabs or forceps clamping or a small amount of cotton cloth to wipe clean. If a cooling fan after six months to a year or so of the normal operation of abnormal noise increases, because fans caused by internal lubricating oil consumed commonly, need to inject oil to the axis of the fan.

tong chi mini cooling fans tell you small make up the cooling fan motor cooling fan for the type of lubricating oil without any requirements, common lubricating oil can be used, but do not use large viscosity lubricating grease, or fan will in irons. Away from the radiator fan, open the bottom oil seal ( General is a piece of black plastic) When, you can see the fan axis, refueling can use tweezers or toothpicks such articles with small cutting-edge take drip into the dip, oil till half shaft depth, not too much. Immediately after refueling good seal to prevent oil volatilization, the horse for a period of time, after waiting for lubricating oil into the bearing internal, and should be fixed on the radiator, fan can be used to the

above is chi miniature automobile cooling fans small make up of the automobile cooling fan fan of installation and maintenance matters needing attention, hope the above content will be helpful to you.

GET IN TOUCH WITH Us
recommended articles
knowledge Info Center
Many of our low-demand customers often go to the electronics market or the so-called wholesale department to buy cooling fans.

Automobile radiator fan factory is a cooling fan manufacturer integrating Ru0026D, production and sales.
Recently, we dealt with a case of changing the installation method of the cooling fan, which has a great impact on the cooling fan.

During normal use of any electronic product, due to the effect of current, there will be varying degrees of temperature rise inside the device, and when the temperature rise of the device exceeds a certain range, its life will be attenuated to varying degrees (for a long time, The safety of equipment operation will also be reduced).
Car cooling fan working position and its principle: cooling fan working principle 1.

The comprehensive laboratory of the automobile radiator fan factory has introduced new equipment-the thermal shock test box.
The commonly used cooling fan voltage is generally 12V, but some customers' products, such as temperature-controlled cooling fans, set a lower voltage for the cooling fan at low temperatures.
When we choose a cooling fan, especially for certain voltages that are not very stable or have several different voltage gears for speed adjustment, we need to understand the voltage range of the cooling fan, such as a cooling fan that works with a 12V DC voltage.
no data
Ready to work with us ?
Find us here: 
After nearly 20 years of hard work, the factory has grown from an unknown family workshop to an industry leader with a complete management system and independent research, development and manufacturing capabilities.
Contact us
Tel: +86 - 576-8625 9388 
Fax: +86 - 576 - 8625 9008

Address:
No. 58-11, Jintang North Road, East Wenling New District, Taizhou City, Zhejiang Province, China
Copyright © 2025 TONGCHI | Sitemap| Privacy Policy
Customer service
detect