Tong chi manufacturer to teach you how to correct maintenance and operation method of mini car radiator cooling fan

Much don't know why this state, the person just phenomenon in great degree. Tong chi manufacturers therefore small make up will tell you about the correct maintenance and operation of micro and subcompact cars a cooling fan rules.

a mini cooling fans, start up to close the damper inspection before mechanical and electronic components, electrical lines, cooling and lubrication, etc, after, before start the motor.

2, after being auto cooling fan motor speed to normal, then gradually open the door to the practical working condition point adjustment.

3, in the strict control in the operation of the electric current, shall not exceed the rating, tong chi factory small make up tell you should regularly check the cooling fan cars bearing temperature. If the temperature rise of more than 40 ℃ ambient temperature or severe vibration, the abnormal phenomenon such as collision, must cause emergency stop

4, only under the normal operation of the car fan equipment completely can operate.

5, chi manufacturer of mini car cooling fan equipment when maintenance after the completion of the start, you also need to pay attention to each part of the auto cooling fan is normal.

6, regularly cleared auto cooling fan inside the backlog of dirt and debris, lubrication not regularly check replacement.

7, auto cooling fan maintenance must be carried out after off the electricity of automobile cooling fans.

8, in the process of the fan drive, parking and operation appeared abnormal phenomenon, should immediately stop check, adjustment and maintenance.

9, such as the flow is too big, do not conform to the requirements of the use or in a short period of time needs to be smaller flow, can use gate or damper adjustment, in order to achieve the requirement.

10, check the bearing temperature of the motor cooling fan and oil level, oil level is too low, shall timely add lubricating oil.