loading

Professional manufacturing and production of radiator cooling fans, condenser fans and fan motors, etc.

Tong chi manufacturer to failure of the cooling fan is analysed and the analysis of the reasons

A cooling fan is known to all, and matters needing attention I believe you also know, that everybody knows the cooling fan of main fault? Today the cooling fan manufacturer small make up to you to summarize the cooling fan fault and cause analysis.

the main cause of the cooling fan noise are: fan dust, normal wear and tear, motor damage, etc.

a, fan dust: a cooling fan air convection produced at work for laptop heat dissipation at the same time, also put the dust in the air and stay in their surface cooling near the mouth, not only affects the cooling effect, and increase the cooling fan of the load at the same time,

has also changed the air convection environment, leading to the noise. This kind of phenomenon if dust removal in time, will not affect the parts; If not dust in time, as time passes can cause fan shaft wear to produce blades 'eccentric', this kind of noise, only replace the cooling fan can solve the problem.

2, normal wear and tear:

a cooling fan blades 'eccentric' is a major cause of noise. Fan blade's center of gravity on the axis, when running smoothly, sound is very small, but with daily use wear, will produce a certain deviation, the focus of blades did not cause any 'eccentric', on the axis of the fan after rolling, is equivalent to an oscillator ( Oscillator is on the motor shaft with an eccentric wheel) , along with the use of time longer, fan bearing wear, exacerbated vibration noise.

3, motor damage:

a cooling fan is an easy wear parts, the motor after reach the design life or be affected with damp be affected with damp internal short-circuit, overload, power surge is likely to lead to motor damage, the fault belongs to the normal phenomenon, replace the fan can be solved.

4, use advice:

wind cooling fan is normal in a work, but when you find the fan sounds than buyers increased sharply with wind or with the normal work of significant differences ( If there are any scratching, crash) When need a maintenance or dust cleaning fan. Advice service engineer, please help clean up the dust fan.

this is the cooling fan manufacturer small make up to you about the cooling fan of the main causes of failure and the solution, you know? Here we also not much said, hope this article can help to you.

GET IN TOUCH WITH Us
recommended articles
knowledge Info Center
Many of our low-demand customers often go to the electronics market or the so-called wholesale department to buy cooling fans.

Automobile radiator fan factory is a cooling fan manufacturer integrating Ru0026D, production and sales.
Recently, we dealt with a case of changing the installation method of the cooling fan, which has a great impact on the cooling fan.

During normal use of any electronic product, due to the effect of current, there will be varying degrees of temperature rise inside the device, and when the temperature rise of the device exceeds a certain range, its life will be attenuated to varying degrees (for a long time, The safety of equipment operation will also be reduced).
Car cooling fan working position and its principle: cooling fan working principle 1.

The comprehensive laboratory of the automobile radiator fan factory has introduced new equipment-the thermal shock test box.
The commonly used cooling fan voltage is generally 12V, but some customers' products, such as temperature-controlled cooling fans, set a lower voltage for the cooling fan at low temperatures.
When we choose a cooling fan, especially for certain voltages that are not very stable or have several different voltage gears for speed adjustment, we need to understand the voltage range of the cooling fan, such as a cooling fan that works with a 12V DC voltage.
no data
Ready to work with us ?
Find us here: 
After nearly 20 years of hard work, the factory has grown from an unknown family workshop to an industry leader with a complete management system and independent research, development and manufacturing capabilities.
Contact us
Tel: +86 - 576-8625 9388 
Fax: +86 - 576 - 8625 9008

Address:
No. 58-11, Jintang North Road, East Wenling New District, Taizhou City, Zhejiang Province, China
Copyright © 2025 TONGCHI | Sitemap| Privacy Policy
Customer service
detect