The five cooling principle of auto radiator

1. Cooling plate: it is a basic way of heat dissipation. In upper and lower part of the cooling fan is equipped with a thermal conductivity board, through the catheter to export the heat generated by the cooling fan, and then use the cooling fan of the outlet exhaust heat, then can from the air inlet into the air. 2. Common radiator cooling fan: this is a common kind of cooling technique, due to the low cost, heat dissipation is more, so most manufacturers will use this kind of cooling technique, but his weakness is extremely, power consumption and heat dissipation speed slower. Now due to technical reasons generally radiator cooling fan is parallel to the main board, so no longer is limited by the thickness of the fuselage, help body is thinner. 3. Ventilation: every on cooling hole, this is one of the more important the cooling way. Usually around the very bottom, according to internal institutions set, set in the corresponding position ventilation can better combined with the actual heating area of the circulating cooling. 4. Keyboard cooling: due to the thin, combined closely with the keyboard at the bottom of the metal plate and the fuselage, can not help but make people come up with a more creative way. Through keyboard issued by metal plate absorbs the heat energy produced is below the cooling fan, then use button hole ruled out hot air, can think of, the heat energy between knock your buttons also quietly eduction. 5. Metal radiator: in fact the casing outside the metal is have certain effect to heat dissipation, but the real metal heat does not mean that the metal shell, but its internal metal. It can run normally in the natural cooling, thus reduce the cooling of the cooling fan for power consumption and the noise outside.