loading

Professional manufacturing and production of radiator cooling fans, condenser fans and fan motors, etc.

'Suddenly like a night of autumn wind' [Car cooling fan] How is the speed controlled?

'Suddenly like a night of autumn wind' [car cooling fan] How is the speed controlled?

u003cbru003e  The operation of the cooling fan changes with the heat. If it runs at a slower speed, the cooling fan will produce less noise and consume less energy.

u003cbru003e   In most design requirements, the air temperature is usually lower than the maximum design temperature after the cooling fan has been operated for several hours. Under normal circumstances, a low-speed cooling fan can adequately complete its work. However, you should also consider when selecting and installing:

u003cbru003e   First of all, the selected cooling fan must be able to provide enough exhaust air (speed) to cool the hot air inside the equipment under high temperature conditions; when the temperature is relatively low and the hot air flow is relatively small, the opposite is done work.

u003cbru003e  Secondly, when choosing the location of the sensor installation, you should pay attention to placing the sensor in an appropriate position and try to make the sensor directly clamped on the surface that needs to be cooled. In the operation of the cooling fan, a temperature-controlled cooling fan will run at a faster speed if the thermistor feels that the temperature is higher; while at a lower temperature, it will run at a lower speed; In the lower middle, the cooling fan speed will hardly change due to temperature.

u003cbru003e   When the temperature of the cooling fan changes slowly, the speed of the cooling fan also changes slowly, and the speed and noise of the cooling fan will not suddenly change. The length of response time mainly depends on the sensitivity of its sensor to heat induction. Therefore, the speed control of the cooling fan is mainly automatically adjusted based on the temperature difference sensor transmitted by the heat sink.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003eRecommendation: Car AC fan http:///products-detail.asp?cpidu003d123

GET IN TOUCH WITH Us
recommended articles
knowledge Info Center
Many of our low-demand customers often go to the electronics market or the so-called wholesale department to buy cooling fans.

Automobile radiator fan factory is a cooling fan manufacturer integrating Ru0026D, production and sales.
Recently, we dealt with a case of changing the installation method of the cooling fan, which has a great impact on the cooling fan.

During normal use of any electronic product, due to the effect of current, there will be varying degrees of temperature rise inside the device, and when the temperature rise of the device exceeds a certain range, its life will be attenuated to varying degrees (for a long time, The safety of equipment operation will also be reduced).
Car cooling fan working position and its principle: cooling fan working principle 1.

The comprehensive laboratory of the automobile radiator fan factory has introduced new equipment-the thermal shock test box.
The commonly used cooling fan voltage is generally 12V, but some customers' products, such as temperature-controlled cooling fans, set a lower voltage for the cooling fan at low temperatures.
When we choose a cooling fan, especially for certain voltages that are not very stable or have several different voltage gears for speed adjustment, we need to understand the voltage range of the cooling fan, such as a cooling fan that works with a 12V DC voltage.
no data
Ready to work with us ?
Find us here: 
After nearly 20 years of hard work, the factory has grown from an unknown family workshop to an industry leader with a complete management system and independent research, development and manufacturing capabilities.
Contact us
Tel: +86 - 576-8625 9388 
Fax: +86 - 576 - 8625 9008

Address:
No. 58-11, Jintang North Road, East Wenling New District, Taizhou City, Zhejiang Province, China
Copyright © 2025 TONGCHI | Sitemap| Privacy Policy
Customer service
detect