Radiator cooling fan in the aspect of security and health preservation and maintenance is very important

Security equipment radiator cooling fan blade to corrosion of 1. By high polymer material, wear-resisting orthopaedics, superfine powders and inorganic polymer dispersed liquid composition, coating particles close packing after curing, has the good adhesion and not easy to fall off, good thermal denaturation. 2. High wear resistance, the experiment shows that the ZS - 911 wear waterproof coating wear resistance is 16 mn steel 9 times as much as 10 times and 65 mn steel, refractory castable 50 times, and with the temperature increase, wear-resisting waterproof coating wear-resisting performance changed little. 3. Coating performance is stable, the use of special raw materials of acid and alkali resistant, not easy to react and medium. Can very good resistance to corrosion environment. 4. Adopted fine resin special molecular structure and stable, not easy ageing. Medical equipment cooling cooling fan storage and maintenance methods: 1, the radiator cooling fan in found during the operation of the fan has a severe fever, abnormal sound, motor shell charged, the phenomenon such as switch trip, can't start, it is necessary to stop the machine immediately to check. In order to ensure that the entire, not allowed in the fan operation for repair and maintenance should be done after commissioning for about five minutes, confirm no abnormal phenomenon to boot. 2, only after the fan springs under the normal operation, at the same time to ensure the power supply facilities sufficient capacity, voltage stability, it is strictly prohibited to open phase running, power supply circuit will xu, a dedicated line, should not use temporary line power supply for a long time. 3, radiator cooling fan in the use of the environment should always keep clean and tidy, cooling fan surface clean, inlet and outlet should not have the sundry, green regularly to remove dust and other sundry fan and the pipeline. 4, radiator cooling fan should be stored in dry environment, avoid motor be affected with damp be affected with damp. When in open air radiator cooling fan, defensive measures. In the process of storage and handling should prevent radiator cooling fan knock against, in order to avoid damage of fan. 5, according to the using conditions from time to time to supplement or replace bearing grease ( Motor bearing, closed in the use of long life period without replacing grease) , in order to ensure the cooling cooling fan in the process of running a good lubrication, refueling times no less than 1000 hours/time closed bearings, bearing and motor oil with zl - 3 lithium base grease filling the 1/3 of bearing inner and outer ring, it is forbidden to short of oil.