Is it sufficient to increase the speed of the high-volume cooling fan?
High-volume cooling fans are an important performance often required in many electronic products and industrial equipment. Because the temperature of products and equipment is very high, a higher-volume cooling fan is required to forcibly dissipate heat. We also know that the higher the speed, the higher the air volume. The larger, then, can the high-volume cooling fan be achieved by increasing the speed? A cooling fan of a certain size and structure actually has an upper limit on its speed. It is not as big as we want. Therefore, when the speed of the cooling fan of this mold reaches the upper limit, it is very difficult to increase the air volume. The cooling fan means that the air volume of this fan is larger than other models of the same specification and size. For example, the 12038 cooling fan has the same 4000 rpm, but the high air volume cooling fan has a larger air volume. The cooling fan Manufacturers’ high-volume cooling fans have molds 2510, 3510, 4007, 5010, 6025, 7010, 7025, 8038, 9025, 9238, 12038 (such as the 3510 cooling fan on the left and the 8038 cooling fan on the right) high-volume cooling fans Mainly lies in the shape design of the fan blades and the positioning of the size of the motor. We call the fan blades with high air volume. As shown in the picture on the left, the 3510 cooling fan has wider blade ends and curved blades. The air volume during rotation is higher than that of ordinary male models. It is 20% larger and the sound is quiet, but the current is relatively higher. Welcome to the heat dissipation classroom and news center of the cooling fan manufacturer again. The copyright belongs to the cooling fan manufacturer and represents only personal opinions. Please do not reprint the whole article. Any violation will be held for legal responsibility. If you need to know more about the cooling fan manufacturer's product introduction, please Click Product Center