Is it possible to customize the parameters of the cooling fan manufacturer?

The cooling fan manufacturer can cooperate with customers to make some special shapes and parameters, but the time and cost will be different. According to the special conditions, the cooling fan manufacturer will have corresponding methods for the cooling fan with a special shape. If customized, it needs to open the mold, and The quantity is at least 5000 units per month, so that the cost is not much different from the conventional shape of the same level. As long as you need to change a screw hole on the outer frame but you need to customize the cooling fan, it is not cost-effective if the quantity is small, although the cost of changing the mold is not High, but running a few hundred injection molding machines will seriously affect the efficiency. Generally, injection molding machines will be used for more than 5,000 units and then change the mold. If it is only the customization of electrical parameters, the cost will be no if the components are not increased. For the above three conditions affected, the cooling fan manufacturer can cooperate with customers for special customization to achieve perfect results. Welcome to visit the cooling classroom and news center of the cooling fan manufacturer again. The copyright belongs to the cooling fan manufacturer and only represents personal opinions. The article is reproduced, violations will be investigated for legal responsibility, if you need to know more about the cooling fan manufacturers, please click on the product center