Introduction of cooling fan production process

A cooling fan needs many processes to complete from the material to the finished product, and each process cannot be sloppy. A single mistake will cause the fan to be defective. Do you know what processes are involved in the production of cooling fans? Tong Chi will introduce to you, the fan production process is as follows: u003cbru003e u003cbru003e u003cbru003e Putting the stator into the frame--Compressing the stator, pressing the bearing, oiling--Fan blade processing-Upper retaining ring-Finished product testing-Labeling and packing u003cbru003e u003cbru003e u003cbru003e The following is a detailed explanation of the operation procedures and precautions of the stator frame. u003cbru003e u003cbru003e u003cbru003e Materials used: fan frame, stator assembly u003cbru003e u003cbru003e u003cbru003e Use tools: finger cots, electrostatic bracelet u003cbru003e u003cbru003e u003cbru003e 1. Make preparations before production u003cbru003e u003cbru003e u003cbru003e 2. Prepare the corresponding fan frame according to the order requirements u003cbru003e u003cbru003e u003cbru003e 3. Take the fan frame with the left hand to check for burrs, take the stator with the right hand after deformation or lack of material, and the PCB board passes through the gap at the bottom of the fan frame along the side with the outlet groove u003cbru003e u003cbru003e u003cbru003e 4. Lightly press the stator with the thumb of the left hand to make the stator overlap the tube of the fan frame vertically, and gently pull the wire with the right hand to fix it in the same direction as the slot of the fan frame u003cbru003e u003cbru003e u003cbru003e 5. Press the stator with the thumb of the left hand to fix it with the tube in the fan frame u003cbru003e u003cbru003e u003cbru003e 6. Clamp the stator wire into the corresponding slot along the outlet slot of the fan frame u003cbru003e u003cbru003e u003cbru003e 7. Put the finished product fan frame with the chassis facing up and upload it to the next station on the assembly line. u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e Precautions for the production of cooling fans: u003cbru003e u003cbru003e u003cbru003e 1. Refer to the BOM table with material specifications u003cbru003e u003cbru003e u003cbru003e 2. Confirm whether the wire is welded backwards u003cbru003e u003cbru003e u003cbru003e 3. Whether the three-point solder joints of the stator and the parts on the PCB interfere with the fan frame chassis u003cbru003e u003cbru003e u003cbru003e 4. Check whether the wire is flat after being stuck in u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e The above is the production process of the cooling fan and the production steps and precautions of the specific process. Every process of the cooling fan produced by our Tongchi Automobile will go through strict evaluation to ensure the quality of the final product. Tongchi Automobile is a cooling fan manufacturer integrating production and sales, focusing on the development and production of cooling fans, axial fans, centrifugal fans, blowers, AC cooling fans, DC cooling fans, etc.; we can provide you with professional cooling system solutions, and we Has its own cooling fan factory and cooling fan brand. Our brand of jentech fans are produced and sold by ourselves, and the quality is guaranteed. It is your best choice for cooling fans.