Examples of ways to maintain DC cooling fans
A general DC cooling fan has a lifespan of up to 40,000-60000 hours under normal use, and its lifespan will be reduced under unsuitable temperatures and environments. It needs to be maintained on time to reach the normal level. The DC cooling fan is stored and maintained in a correct way to extend the service life of the DC cooling fan. How to maintain the DC cooling fan? Tongchi will tell you several methods. u003cbru003e u003cbru003e u003cbru003e 1. During the operation of the DC cooling fan, it is found that the fan has abnormal noise, the motor is severely heated, the shell is electrified, the switch has tripped, and cannot be started. It should be shut down immediately for inspection. In order to ensure safety, maintenance is not allowed during the operation of the fan. After the maintenance, a trial operation should be carried out for about five minutes to confirm that there is no abnormal phenomenon before starting the operation. u003cbru003e u003cbru003e u003cbru003e 2. The DC cooling fan should be stored in a dry environment to prevent the motor from getting damp. When the DC cooling fan is stored in the open air, there should be defensive measures. During storage and handling, the DC cooling fan should be prevented from bumping to avoid damage to the fan. u003cbru003e u003cbru003e u003cbru003e 3. The DC cooling fan can only be operated when the fan is fully normal. At the same time, it is necessary to ensure that the power supply facilities have sufficient capacity and stable voltage. Phase failure operation is strictly prohibited. The power supply line must be a dedicated line and should not be used for long-term temporary power supply. u003cbru003e u003cbru003e u003cbru003e 4. The DC cooling fan should always be kept tidy in the operating environment, the surface of the fan should be kept clean, there should be no debris at the inlet and outlet, and the dust and other debris in the fan and pipeline should be cleaned regularly. u003cbru003e u003cbru003e u003cbru003e 5. Irregularly add or replace grease to the bearings according to the environmental conditions (motor enclosed bearings do not need to replace grease during the service life), in order to ensure good lubrication of the DC cooling fan during operation, the number of refueling is not Less than 1000 hours/time to seal the bearings and motor bearings, fill 1/3 of the bearing inner and outer rings with zl-3 lithium base lubricating grease, and it is strictly forbidden to run without oil. u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e u003cbru003e Through the above methods to maintain the DC cooling fan, I believe that your fan can reach the normal service life, and the service life may be longer if you regularly check and maintain it. The operating temperature range of the fan: -10-+70 degrees, except A waterproof cooling fan with a high degree of protection should avoid using your cooling fan in humid and rainy environments, and pay attention to moisture. Pay attention to our Tongchi car and take you to know more about cooling fans. We have our own brand of cooling fans: jentech fans are available for you to choose. Welcome your understanding and attention.