loading

Professional manufacturing and production of radiator cooling fans, condenser fans and fan motors, etc.

Clean car radiator cooling fan?

Applied in the car radiator cooling fan, can for the automotive radiator cooling, reduce car work, has the vital role. But the cooling cooling fan for a long time after use, but failed to clean up on time, there will be a lot of dust impurity accumulation, affect the use effect of the cooling fan. So on a regular basis for cleaning of the cooling fan is very be necessary, then we should be how to auto radiator cooling fan to clean up? The following YiRongChuan technician under the simple introduction for you. Clean the surface of the radiator cooling fan, only need to use a brush or towel to wipe the dust gently. Clean up the radiator cooling fan inside words must first open the cooling fan, cooling fan on two small screws, put them off, close to the outlet side is loose. Gently pry the cooling fan of the metal card buckles, the cooling fan on one side of the cover plate can be opened and note card buckle don't open the Angle is too large, so as not to lose elasticity, when in the back of the card is not tight. Open after the cooling fan in simple with brush to brush the dust again after the water with a paper towel or cotton cloth wipe blades again carefully, it is best not to use some organic solvent, because it is easy to cause blades instead of chemical reaction, etching blades. Placed a period of time, or if under high temperature baking is easier to make blades brittle, accelerated aging, the water is ok. Radiator cooling fan after cleaned up, drop a drop of lubricating oil for the cooling fan bearing, the cooling fan running smoothly. Adopt the method of before open it back together again.

GET IN TOUCH WITH Us
recommended articles
knowledge Info Center
Many of our low-demand customers often go to the electronics market or the so-called wholesale department to buy cooling fans.

Automobile radiator fan factory is a cooling fan manufacturer integrating Ru0026D, production and sales.
Recently, we dealt with a case of changing the installation method of the cooling fan, which has a great impact on the cooling fan.

During normal use of any electronic product, due to the effect of current, there will be varying degrees of temperature rise inside the device, and when the temperature rise of the device exceeds a certain range, its life will be attenuated to varying degrees (for a long time, The safety of equipment operation will also be reduced).
Car cooling fan working position and its principle: cooling fan working principle 1.

The comprehensive laboratory of the automobile radiator fan factory has introduced new equipment-the thermal shock test box.
The commonly used cooling fan voltage is generally 12V, but some customers' products, such as temperature-controlled cooling fans, set a lower voltage for the cooling fan at low temperatures.
When we choose a cooling fan, especially for certain voltages that are not very stable or have several different voltage gears for speed adjustment, we need to understand the voltage range of the cooling fan, such as a cooling fan that works with a 12V DC voltage.
no data
Ready to work with us ?
Find us here: 
After nearly 20 years of hard work, the factory has grown from an unknown family workshop to an industry leader with a complete management system and independent research, development and manufacturing capabilities.
Contact us
Tel: +86 - 576-8625 9388 
Fax: +86 - 576 - 8625 9008

Address:
No. 58-11, Jintang North Road, East Wenling New District, Taizhou City, Zhejiang Province, China
Copyright © 2025 TONGCHI | Sitemap| Privacy Policy
Customer service
detect