Can the finished cooling fan be modified?

Can you change the cooling fan for me? This is usually done according to customer requirements, but it is found that it is wrong. It is required to change the parameters and specifications. In fact, there is no way to change the cooling fan. It means that the motor is wired. The diameter and number of turns are determined, including the selection of the outer frame, which are all one-to-one correspondence, and are matched. For example, if you want to change the speed, you have to rewind the motor, that is, do it again. For example, if you need to change the outer frame of the cooling fan, the leaves have to be replaced. Even if the diameter of the motor is the same, the outer frame can no longer be used after disassembly and reinstallation. This is more troublesome than making a new one. Therefore, before the cooling fan manufacturer cooperates with each customer, it will first confirm with the sample, and then formally start to accept the order after the specification is confirmed, which is to avoid some small oversights. Welcome to the heat dissipation classroom and news center of the cooling fan manufacturer again. The copyright belongs to the cooling fan manufacturer and represents only personal opinions. Please do not reprint the whole article. Any violation will be held for legal responsibility. If you need to know more about the cooling fan manufacturer's product introduction, please Click on the product center