loading

Professional manufacturing and production of radiator cooling fans, condenser fans and fan motors, etc.

A cooling fan air volume and air pressure

Everyone knows that a cooling fan is mainly used for heat dissipation effect, we can from the following two aspects to consider the use effect of the cooling fan, everybody together to see see!

air volume:

air volume per minute is refers to the cooling fan out or into the air volume, if calculated by cubic feet of air unit is CFM; If according to cubic meters to calculate, is to the CMM. A cooling fan often use air unit is CFM ( Is about 0. 028 cubic meters/min) 。

air volume is the zui important indicators of cooling fan cooling capabilities. Obviously, the greater the volume of cooling fan the higher cooling capacity. This is because the heat capacity ratio of air is certain, larger volume and per unit time is more air can take more heat. Of course, the same air under the condition of the cooling effect and wind flow way.

wind pressure:

wind pressure and air volume are two relative concepts. In general, under the manufacturer's cost considerations, to design the fan air volume is big, have to sacrifice some wind pressure. If the fan can bring a lot of air flow, but the wind pressure is small, the wind is less than the bottom of the radiator ( That is why some fan speed is high, volume is very big, but it is the reason why cooling effect is not good) , on the contrary, wind pressure is often means that the air volume is small, there is not enough air and heat sink for heat exchange, also causes the cooling effect is not good.

GET IN TOUCH WITH Us
recommended articles
knowledge Info Center
Many of our low-demand customers often go to the electronics market or the so-called wholesale department to buy cooling fans.

Automobile radiator fan factory is a cooling fan manufacturer integrating Ru0026D, production and sales.
Recently, we dealt with a case of changing the installation method of the cooling fan, which has a great impact on the cooling fan.

During normal use of any electronic product, due to the effect of current, there will be varying degrees of temperature rise inside the device, and when the temperature rise of the device exceeds a certain range, its life will be attenuated to varying degrees (for a long time, The safety of equipment operation will also be reduced).
Car cooling fan working position and its principle: cooling fan working principle 1.

The comprehensive laboratory of the automobile radiator fan factory has introduced new equipment-the thermal shock test box.
The commonly used cooling fan voltage is generally 12V, but some customers' products, such as temperature-controlled cooling fans, set a lower voltage for the cooling fan at low temperatures.
When we choose a cooling fan, especially for certain voltages that are not very stable or have several different voltage gears for speed adjustment, we need to understand the voltage range of the cooling fan, such as a cooling fan that works with a 12V DC voltage.
no data
Ready to work with us ?
Find us here: 
After nearly 20 years of hard work, the factory has grown from an unknown family workshop to an industry leader with a complete management system and independent research, development and manufacturing capabilities.
Contact us
Tel: +86 - 576-8625 9388 
Fax: +86 - 576 - 8625 9008

Address:
No. 58-11, Jintang North Road, East Wenling New District, Taizhou City, Zhejiang Province, China
Copyright © 2025 TONGCHI | Sitemap| Privacy Policy
Customer service
detect